Career at EPCC contractor Malaysia 2012
A leading and experienced EPCC contractor providing total solutions to meet the demands of itsclients in the areas of Oil & Gas, Petrochemicals & Gas Facilities and Industrial Plants, is looking for suitable qualified employees who is rightly motivated and who seeks challenging and exciting career to fill the following positions in Kuala Lumpur, Malaysia office.
Piping Engineer
Requirements:
· Candidate must possess at least Degree in Mechanical or Material Engineering.
Responsibilities:
Electrical Engineer
Requirements:
· Posses a Degree in Electrical Engineering.
Responsibilities:
· Responsible for delivering Electrical design engineering work efficiently and in a timely manner during proposal and project delivery stage.
· Electrical Design & Engineering Work – to develop engineering design work based on requirements and to coordinate with other departments on the design work.
· Preparing pre-commissioning/ commissioning procedure and assistance.
· Construction Assistance – to provide supervision at the construction site (depends on projects varies from few days to few months).
· Procurement Assistance – to provide data sheet to Procurement, prepare bid tabulation and conduct evaluation on vendors’ quotation.
Mechanical Engineer
Requirements:
Responsibilities:
Instrument Engineer
Requirements:
· Candidates must posses at least a Degree in Electronics, Instrumentation or Chemical Engineering background.
· Minimum 5 years experience with at least 3 years of engineering design experience in Oil & Gasand Petrochemical industries.
· Experienced in handling rejuvenation and revamp project.
· Familiar with international codes and standard (especially IEC, ISA, etc.)
· Able to carry out site survey in order to gain required information and/or verification of existing plant documentation.
· Experienced in Instrument installation or commissioning.
· Knowledge with SPI INTOOLS software.
· Good command in Malay and English (spoken and written).
· Able to work in team and posses excellent interpersonal and communication skills.
Responsibilities:
Process Engineer
Requirements:
· Bachelor Degree in Chemical Engineering
· Priority for candidates with 3-4 years process engineering experience in Oil & Gas and Petrochemical fields
· Fluent in English and Bahasa Malaysia
· Willing to travel and station at site
· Willing to work for long hours
· Knowledge in AUTOCAD is a plus
· PC literate (MS Office)
· Good interpersonal, communication, writing and presentation skills.
· Familiarity with API and Petronas Standards.
· Process Simulation Experience in PRO II.
· Posses key skills such as Flexibility, Team Work, Problem Solving and Good Communication.
· Member of professional body is an advantage.
Responsibilities:
· Involve in various engineering stage such as Basic and Detail Engineering.
· Participate in ITB study and prepare bid specifications
· Preparation Process Drawings such as Process Flow Shem, Piping & Instrumentation
Diagram and other deliverables
· Support precommissioning and commissioning activity
· Interface with other internal disciplines such as Mechanical, Piping, Instrument
· Accountable for success completion of assigned engineering tasks
· Interface with clients and vendor to define project scope
· Participation in Client, Vendor and Internal meetings.
· Able to resolve technical issues
Career at Kuwait Oil Company in KL 2012
Career Major Oil & Gas Client in UAE and ADNOC Subsidiaries
A leading and experienced EPCC contractor providing total solutions to meet the demands of itsclients in the areas of Oil & Gas, Petrochemicals & Gas Facilities and Industrial Plants, is looking for suitable qualified employees who is rightly motivated and who seeks challenging and exciting career to fill the following positions in Kuala Lumpur, Malaysia office.
Piping Engineer
Requirements:
· Candidate must possess at least Degree in Mechanical or Material Engineering.
· Minimum 5 years of piping design experience in Oil & Gas, Petrochemical industries.
·Familiar with international codes and standard (especially ASME31.3, ASME, API, PTS, SHELL DEP, etc.)
· Good knowledge in preparation of engineering specifications and Job instructions for piping designs, insulation, painting etc.
·Good knowledge in Plant Layout Planning and Detailed Piping Design in view of Construction, Process Flow Scheme, Machinery Operation etc.
· Familiar with coordination work with Civil & Structural, Mechanical, Instrumentation and Electrical interfacing with regard to layout and piping design.
· Able to carry out site survey in order to gain required information and/or verification of existing plant documentation.
· Having previous experience in Greenfield, Brownfield and plant modification projects.
· Able to work in team and posses excellent interpersonal, communication and writing skills.
· Well verse with CAESAR II and AUTOCAD software.
· Experience in PDS / CADWORX 3D Cad would be added advantage.
· PC literate (MS Word, Excel, PowerPoint, and MS Project as a minimum).
· Good command in English (spoken and written).
· Establish standard and concept for the work to comply with job requirement.
· Responsible in pipe routing and equipment layout planning study.
· Responsible in engineering design works such as plot plan, key plan, Underground and Aboveground piping arrangement, construction isometric and pipe support detail drawing, field fabrication part, etc.
·Responsible to review information drawings such as civil information, nozzle orientation, vessel clip, instrument component information and process information (piping isometric for calculation of hydraulic delta-p, etc.)
· Review all internal design check (IDC) documents from all disciplines.
· Coordination work with Civil & Structural, Mechanical, Instrumentation and Electrical interfacing with regard to layout and piping design.
· Prepare project schedule and
· Liaise with clients and vendors for technical issues.
· Responsible in planning, scheduling, quality control of designated project to ensure that objective of the project are accomplished within the prescribed time frame and budget.
· Assist construction and commissioning activities (Field/Site works).
Electrical Engineer
Requirements:
· Posses a Degree in Electrical Engineering.
· At least 5 years of working experience preferably in Oil & Gas industry.
· Capable to prepare electrical deliverables such as Single Line Diagram, Load Schedule, Motor Control Schedule, Cable Schedule, Cable routing drawing, Power and Control drawing, Area Classification drawing, grounding drawing, etc.
·Sufficient knowledge of International Codes & Standards in relation to Electrical Design.
· Able to undertake works in electrical design up to construction at site (supervision).
·Experience in Project Engineering, Preparation of Electrical Inquiry Documents and commercial/technical Bid Evaluation. MTO and Cost Estimation and Inter-Discipline coordination.
· Familiar with Electrical Equipments such as Transformers, HV & LV Switchgear, MCC, Motors, UPS, LCS, Communication equipments, etc.
· Able to perform Electrical calculation such as Cable sizing/Voltage Drop calculation, Short circuit study, etc.
· PC literate (MS Word, Excel & PowerPoint) and knowledge in Auto-Cad.
· Ability to work in team, possess excellent communication and interpersonal skills.
· Responsible for delivering Electrical design engineering work efficiently and in a timely manner during proposal and project delivery stage.
· Electrical Design & Engineering Work – to develop engineering design work based on requirements and to coordinate with other departments on the design work.
· Preparing pre-commissioning/
· Construction Assistance – to provide supervision at the construction site (depends on projects varies from few days to few months).
· Procurement Assistance – to provide data sheet to Procurement, prepare bid tabulation and conduct evaluation on vendors’ quotation.
Mechanical Engineer
Requirements:
· Posses a Degree in Mechanical Engineering from a recognized university.
· Min 5 to 8 years of design experience in the Oil & Gas industry.
· Knowledgeable in API, ASME codes and sound experience in handling Rotating machineries such as Pumps, Gas Compressors and Turbines.
· Able to do inter-discipline co-ordination and possess good communication skills with clients and sub-contractor.
· PC literate (MS Word / Excel, PowerPoint and AutoCAD)
· Independent, self-motivated individual with good communication and interpersonal skills.
· Rotating Equipment Engineer shall execute EPC projects in mechanical department, with responsibilities of preparing job execution plan, machinery specifications, data sheet for vendor inquiry, requisitions, vendor technical evaluation reports, check/review/clarify vendor’s bids, vendor’s documents and P&ID related to rotary machinery.
· The position is also responsible for controlling quality, cost, engineering schedule and work hours, and coordinating with clients/other engineering departments/engineering subcontractors/vendors.
· The position is also responsible to instruct and coordinates with subordinates and other discipline engineers.Instrument Engineer
Requirements:
· Candidates must posses at least a Degree in Electronics, Instrumentation or Chemical Engineering background.
· Minimum 5 years experience with at least 3 years of engineering design experience in Oil & Gasand Petrochemical industries.
· Experienced in handling rejuvenation and revamp project.
· Familiar with international codes and standard (especially IEC, ISA, etc.)
· Able to carry out site survey in order to gain required information and/or verification of existing plant documentation.
· Experienced in Instrument installation or commissioning.
· Knowledge with SPI INTOOLS software.
· Good command in Malay and English (spoken and written).
· Able to work in team and posses excellent interpersonal and communication skills.
· Responsible for delivering instrument engineering design work efficiently and in a timely manner during proposal and project delivery stage.
· Preparation of instrument datasheet, instrument list, I/O list.
· Preparation of instrument sizing for flow element and valves.
· Familiar with IPF methodology and implementation.
· Control system such as DCS (Honeywell), ESD PLC, mechanical equipment package control system PLC and relay base system.
· Preparation of loop drawings, interlock logic diagram.
· Preparation of cable schedule, cable connection list, junction box schedule, etc.
· Preparation of typical installation drawing, instrumentation hook-up drawings.
· Preparation of construction drawings such as instrument plot plan, wiring layout, etc.
· Preparation of Material Take-off for installations.
Requirements:
· Bachelor Degree in Chemical Engineering
· Priority for candidates with 3-4 years process engineering experience in Oil & Gas and Petrochemical fields
· Fluent in English and Bahasa Malaysia
· Willing to travel and station at site
· Willing to work for long hours
· Knowledge in AUTOCAD is a plus
· PC literate (MS Office)
· Good interpersonal, communication, writing and presentation skills.
· Familiarity with API and Petronas Standards.
· Process Simulation Experience in PRO II.
· Posses key skills such as Flexibility, Team Work, Problem Solving and Good Communication.
· Member of professional body is an advantage.
Responsibilities:
· Involve in various engineering stage such as Basic and Detail Engineering.
· Participate in ITB study and prepare bid specifications
· Preparation Process Drawings such as Process Flow Shem, Piping & Instrumentation
Diagram and other deliverables
· Support precommissioning and commissioning activity
· Interface with other internal disciplines such as Mechanical, Piping, Instrument
· Accountable for success completion of assigned engineering tasks
· Interface with clients and vendor to define project scope
· Participation in Client, Vendor and Internal meetings.
· Able to resolve technical issues
Interested candidates are invited to send e-mail their resume giving full personal details, educational qualification, working experience, present and expected salary, together with recent passport size photograph and indicate the position applied for on the subject to:-
Career at Kuwait Oil Company in KL 2012
We wish to inform you that our Client KOC (Kuwait Oil Company) is going to have an interview campaign at Malaysia in the last week of September 2012, KOC wish to recruit following Oil Exploration professionals.
Kindly let us know your availability for this interview so we can start further communication.
NEW OPENINGS WITH KOC
| |||||
S.No.
|
Job Title / New Positions
|
Years of Experience
|
S.No.
|
Job Title / New Positions
|
Years of Experience
|
1
|
Senior Petroleum Engineer
|
Min 10 Years
|
9
|
Petroleum Engineer
|
Min 8 Years
|
2
|
Senior Reservoir Engineer
|
Min 10 Years
|
10
|
Petrophysicists
|
Min 8 Years
|
3
|
Senior Planning Engineer
|
Min 10 Years
|
11
|
Geologist
|
Min 8 Years
|
4
|
Senior Engineer Projects
|
Min 10 Years
|
12
|
Geophysicists
|
Min 8 Years
|
5
|
Senior Petrophysicist
|
Min 10 Years
|
13
|
Earth Scientists
|
Min 8 Years
|
6
|
Senior Geologist
|
Min 10 Years
|
14
|
Interpreter Geophysicists
|
Min 8 Years
|
7
|
Senior Geophysicists
|
Min 10 Years
|
15
|
Interpreter Geologist
|
Min 8 Years
|
8
|
Reservoir Engineer
|
Min 8 Years
|
16
|
Marine Pilot
|
Min 8 Years
|
Note: Ticket will be provided by KOC to those candidates staying surrounding Country of Malaysian
Thanks and Regards
MOHAMMAD IMRAN WARSI
Executive - Recruitment & Executive Search
Oil & Gas | Energy
Jerry Varghese Global
20th floor, Tiffany Tower
W2 – Jumeirah Lakes Towers
P.O. Box: 23343, Dubai, UAE.
É : +971 4-4550487 (DIR) | Ê : +971 4-4298461 Cell # +97-150-1904576
Career Major Oil & Gas Client in UAE and ADNOC Subsidiaries
Kindly be advised that currently we have the following vacancies for one of our Major Oil & Gas Client in UAE and ADNOC Subsidiaries. Please find the attached job descriptions for your review and kindly confirm if you are interested. If so, please send us your updated CV to enable us to proceed with the submission.
Position
| |
1.
|
Interface Engineer (Process)
|
2.
|
Interface Engineer (Project)
|
3.
|
Interface Engineer (Commissioning)
|
4.
|
Mechanical Piping Engineer
|
5.
|
Rotating Machinery Engineer
|
Moreover, we would highly appreciate if you can spread these vacancies to any of your Friends / Colleagues or former colleagues who might be interested to apply and please ask them to send their CVs to my email addressjammierose.manuzon@idcmps.ae & upload their CV in http://www.idcman.com/. Thank you so much and looking forward to hear from you and from friend’s coon.
0 comments:
Post a Comment