Recruitment for Construction Professionals for Qatar

Walk in Interview at Chennai on 18th Sept 2012

Excellent Salary & Other Benefits

No of Requirement : 4 No

About our Client : GCC is British Management Construction company in Qatar involved in Various top projects from Ministry and Private sector.

Job Description :

Estimator shall be responsible for the following but not be limited to the important activities:

i) Collection of tender inquiries and documents for the pre tender works.

ii) Preparation and submission of tenders/ quotations.

iii) Collection of quotations for various subcontracted items for the bidding of the new tenders.

iv) Site visits for the new tenders.

v) Calculation of quantities and variations for the bidding of new projects and post tendering.

vi) Submission of all tenders on time, collection of all post tender information.

vii) Management of all the documentations of estimating department

viii) Co-ordination with client/ consultant for new contracts.

ix) Submission of pre-qualification documents.

x) Verify the Quality, Safety and Environment requirements of the tenders. ( Rev.01)

xi) Give the feed back on Quality, Safety and Environmental requirements to QA/QC and HSE department. ( Rev.01)

xii) Implement and monitor the Quality, Safety and Environmental management in estimation department. (Rev.01)

Candidates will have good construction knowledge. Estimator will be able to produce fully analytical Tenders using CCS computer estimating package.

Graduates in B.E / B.Tech / Civil Engineering with 5-10 years plus experience in Estimation required. It is preferred each candidate have 3-5 years middle east experience and must have an ability to work with full a management team. Salary and conditions according to experience.

Candidates with relavent Industry May Walk In for Shortlisting / May forward their detailed resume to operation6@agpindia.com

Assuring Best of services

Autocad Draughtsman (Joinery Division)

Recruitment for Construction Professionals for Qatar

Walk in Interview at Chennai on 18th Sept 2012

Excellent Salary & Other Benefits

About our Client : GCC is British Management Construction company in Qatar involved in Various top projects from Ministry and Private sector.

Job Description :

Total Requirements: 8 Persons

1. Prepare shop drawings with detailed complex joinery fit out related items.
2. Take site measurements & surveys should it be required to develop details further.
3. Prepare & maintain schedules & updating them periodically.
4. Maintain a proper filling system of all works done.

5. Should be able to read B.O.Q and relate to respective drawings.
6. Should be able to read specifications and relate to respective drawings.
7.Should have knowledge of production process & site installation procedures.
8.Should be able to review complex interiors related items from subcontractors.

3-5 yrs gulf experience within a joinery or interior fit out company.
Fluency in operating latest version of AutoCAD, 3DS Max, Photoshop Excel & word.

Candidates with relavent Industry May Walk In for Shortlisting / May forward their detailed resume to operation6@agpindia.com

Recruitment for Construction Professionals for Qatar

Walk in Interview at Chennai on 18th Sept 2012

Excellent Salary & Other Benefits

No of Requirement : 16 No

About our Client : GCC is British Management Construction company in Qatar involved in Various top projects from Ministry and Private sector.

Job Description :

Degree/Diploma holders in Civil Engineering with around 2 – 5 years experience in ensuring compliance with
Quality in construction on project execution. Candidates with working experience in Oil & Gas
Industry will be given first preference. Knowledge in ISO is an additional advantage.

Candidates with relavent Industry May Walk In for Shortlisting / May forward their detailed resume to operation6@agpindia.com

Recruitment for Construction Professionals for Qatar

Walk in Interview at Chennai on 18th Sept 2012

Excellent Salary & Other Benefits

No of Requirement : 20 No

About our Client : GCC is British Management Construction company in Qatar involved in Various top projects from Ministry and Private sector.

Job Description :

Civil Degree / Diploma holders
1 to 3 years good experience working with Construction Projects

Candidates with relavent Industry May Walk In for Shortlisting / May forward their detailed resume to operation6@agpindia.com

Recruitment for Construction Professionals for Qatar

Walk in Interview at Chennai on 18th Sept 2012

Excellent Salary & Other Benefits

No of Requirement : 12 No

About our Client : GCC is British Management Construction company in Qatar involved in Various top projects from Ministry and Private sector.

Job Description :

Civil Degree / Diploma holders
3 to 5 years good experience working with Construction Projects

Candidates with relavent Industry May Walk In for Shortlisting / May forward their detailed resume to operation6@agpindia.com

Recruitment for a Facility Management Professionals – Qatar

Telephonic Interview

Qualification:

5 to 10 years as Facilities Manager in a leading Facilities Management company.
Should have managed multi story building / commercial establishments.
Should have managed hard services like HVAC Maintenance, Electrical, Generators, Plumbing, masonry etc and soft services like cleaning/housekeeping, mail room, reprography, landscaping etc.

Other skills:

Excellent communication skills, very good in Microsoft applications (especially MS Excel and Power Point etc), leadership skills, excellent client relationship skills, should be self-driven guy etc.

Qualification:

B.E in Mechanical Engineering with exposure of Electrical engineering

Salary:

QR.8000 + free accommodation, free food, free medication, yearly ticket, single status and other benefits as per Qatar labour law.

Candidates with relavent Industry experience may forward their detailed resume tooperation5@agpindia.com

GOLDEN OPPORTUNITY FOR SALES ASSISTANT

IN SAUDI ARABIA

EXCELLENT SALARY + HOUSING + TRANSPORTATION ALLOWANCE

AGE : 22 – 32 Years

SHORTLISTING IS IN PROGRESS

(SHORTLISTED CANDIDATES WILL ONLY BE INTERVIEWED BY CLIENTS)

CLIENT’S FINAL INTERVIEW SHORTLY AT CHENNAI (During 2nd Week of Sept)

About our Client :

ATS is a One of the Biggest Company in the Kingdom of Saudi Arabia, involved in Sales & Distribution of International Products as diverse as Food Stuff, Personal Care Products and Household goods.

Candidates with relavent Industry Experience may WALK IN with detailed Resume, Copies of Educational, Exprience Certificates, Recent Photograph and Original to

Assuring Best of Services

Ismail

Executive – Recruitment

AGP International Services, 11 Crescent Court, 963 Periyar EVR High Road, Behind Egmore Railway Station, Chennai – 84

Ph 044 4445 0016 (Dir) / Off : 044 4445 0000 (30 Lines)

Career at Malaysian Oil & Gas company 2012 : Business Development Manager - LNG |

A well-known Malaysian Oil & Gas company is currently looking for a Business Development Manager to help them develop their LNG operations & transportation services.

Job Title: Business Development Manager - LNG

Responsibilities: LNG Business Unit.

Skills & Qualifications:
- 8 years Oil & Gas experience
- 5 years of Sales & Business Development experience
- Desired technical knowledge: LNG
- Malaysians will be preferred

If you are interested to apply, please send your CV to Noemie Alintissar or visit sg.progressiverecruitment.com

SThree Pte Limited - Company Licence Number 09C5506

Reference: 1458105
Contact name: Noemie Alintissar
Email: permanent@progressiveoilandgas.com
Contact telephone: +65 6227 3715

Career at Oil & Gas consultancy 2012 : Piping Draughtsman |

I've just got off the phone to a client who has an urgent requirement for an experienced Piping Draughtsman to join them on a contract basis.

The candidate must have a minimum of 2 years Industry experience and be a competent user of Auto-Cad. The client is expecting the candidate to be familiar with Plant layout, P&IDs, Isometrics and Microstation.

The initial contract length is 3 - 6 months with the view to extend and a minimum 40 hour working week. As the client is based in Great Yarmouth, they are happy to accommodate flexible working hours.

This is a great opportunity to work for a leading Oil & Gas consultancy and have a contract in your hand by the end of next week. Telephone Interviews are scheduled for Tuesday. Please forward your CV for consideration if this role is of interest or contact me directly on 0207 469 5203.

Progressive Global Energy & Natural Resources is proud to be a member of EIC.

Reference: PR-12297163
Contact name: Lucy Ward
Email: london.contract@progressiverecruitment.com
Contact telephone: +44 (0) 207 469 5255

Career at Oilfield services 2012 : Account Manager |

A reputable service company is currently looking for an Account Manager to join their team in Malaysia.

Job Title: Account Manager – Oilfield Services

Skills & Qualifications:
- 10 years Oil & Gas experience
- 8 years of Sales & Business Development experience
- Desired technical knowledge: Oilfield Services

Salary & Benefits: 15-16k MYR per month

If you are interested to apply, please send your CVto Noemie Alintissar or visitsg.progressiverecruitment.com

SThree Pte Limited - Company Licence Number 09C5506

Reference: 1458202
Contact name: Noemie Alintissar
Email: permanent@progressiveoilandgas.com
Contact telephone: +65 6227 3715

Career at KBR 2012 : Structural Mechanical Supervisor |

One of KBR Company, a worldwide leader in the design, engineering,Procurement and construction of bulk material handling and processing Systems for the power and mining industries seeks talented and experienced Indonesian nationals to fill the following positions:

Supervisor Structural – Mechanical

Core Competency:

·At least 7 Years Experience, in Structural Erection/Mechanical (Industrial Machinery) Installation.

·Mechanical or Civil Structural Background.

·Have Experience in Material Coal Handling at least 3 Years.

·Can Join Immediately

General Requirement:

Willing to join as Contract Employee.
Willing to be relocated to Kalimantan

Interested applicants should send their resume, in English to FJKTREC@kbr.com

DO NOT attach scanned certificates, transcripts and reference letters and ONLY SHORT-LISTED candidates will be contacted

Career at EPCI Contractor in Oil and Gas company 2012 : Document Control |

We are national EPCI Contractor in Oil and Gas company and currently looking for a candidate who has experiences which to be hired as :

Document Control

Job qualifications :
-    Minimum Diploma degree and graduated from reputable University
-    Experienced in the same position (at the least in the same area), minimum 2 years
-    Having experience using software Ms. Office 2007, especially Ms. Excel and Ms. Word
-    Having experience as oil and gas business scope of is an advantage
-    Capable in English literate written and verbal
-    Has good communication skill and team player
-    Able to work with minimum supervision and detailed oriented
-    Shall be women with maximum 28 years ages
-    Willing to be located in Balikpapan city, East Kalimantan

Please send your Application Letter, Resume with recent photograph by e-mail (in format Ms. Word) to :
premium_recruitment@yahoo.com before 21 September, 2012.

Note : Reference Position and Name of candidate must be written on the e-mail subject. Only short listed candidate will be informed.

Career at PT. AMEC Berca Indonesia 2012 : Various Positions |

PT. AMEC Berca Indonesia (ABI) is a multi-national company providing engineering & asset support services to the Indonesian oil and gas industry. ABI plans to expand to other market segments and develop into EPC Company. Now, the company is seeking high qualified candidates to strengthen our team.

1. SUBJECT MASTER EXPERT (SME) –Operations and Maintenance

Ø Degree or Diploma in Chemistry, Chemical Engineering, Mechanical Engineering.

Ø A minimum of ten (10) years operating experience in the oil and gas industry.

Ø Technical writing experience and/or equivalent process industry training experience is preferred.

Ø Excellent English reading and writing skills are essential; additional languages considered an asset.

Ø Ability to comprehend P&ID’s, vendor information, and process control descriptions.

Ø A strong proficiency in MS Word is required.

Ø Must be able to relocate to Jakarta or work on a rotational basis.

Ø Must be able to travel and have a willingness to work on occasion in various field locations.

Role :

Ø Working with a technical writer to develop content for operating and maintenance procedures; using your process knowledge and site-specific engineering information.

Ø Reporting project progress to the Project Manager.

Ø Contacting client and vendor representatives to obtain and clarify technical information; working remotely and during on-site visits.

Ø Working within a team environment, using strong interpersonal skills while enabling seamless interaction with internal departments and client representatives.

Ø Generating requests for information for client and vendor representatives.

Ø Following and maintaining project standards.

Ø Potentially leading and supporting a team of in-country technical writers.

2. PROJECT OPERATION MANAGER

Ø Min. bachelor degree of any engineering background

Ø Minimum 15 years of multi-disciplinarily design engineering experience in the oil & gas industry, encompassing conceptual designs and FEED through to detailed design and brown field engineering modifications

Ø Experience team leader with a proven track record of performance improvement

Ø Excellent communication in both written and spoken in Bahasa Indonesia and English

3. PIPING LEAD ENGINEER

Ø Minimum Bachelor Degree in Mechanical major

Ø Minimum 6 years of piping engineering and design experience in the oil & gas industry

Ø Capable being a team leader with a proven track record of performance improvement

Ø Excellent communications in both written and spoken in English and Bahasa Indonesia

4. MECHANICAL ROTATING LEAD

Ø Minimum Bachelor Degree in Mechanical major

Ø Minimum 7 years of mechanical engineering and design experience in the oil & gas industry

Ø Capable being a team leader with a proven track record of performance improvement

Ø Excellent communications in both written and spoken in English and Bahasa Indonesia

5. Sr. TECHNICAL SAFETY ENGINEER (STSE)

Ø Minimum Bachelor Degree in Chemical, Physic or Mechanical major

Ø Minimum 5 years of Technical Safety engineering and design experience in the oil & gas industry

Ø Excellent communications in both written and spoken in English and Bahasa Indonesia

6. TECHNICAL SAFETY ENGINEER (TSE)

Ø Minimum Bachelor Degree in Chemical, Physic or Mechanical major

Ø Minimum 2 years of Technical Safety engineering and design experience in the oil & gas industry

Ø Excellent communications in both written and spoken in English and Bahasa Indonesia

7. PROJECT MANAGER (PM)

Ø Min. Bachelor Degree of any engineering background

Ø Experience team leader with a proven track record of performance improvement

Ø Excellent communication in both written and spoken in Bahasa Indonesia and English

8. PIPING LEAD ENGINEER (PLE)

Ø Minimum Bachelor Degree in Mechanical major

Ø Minimum 6 years of piping engineering and design experience in the oil & gas industry

Ø Capable being a team leader with a proven track record of performance improvement

Ø Excellent communications in both written and spoken in English and Bahasa Indonesia

9. BUSINESS DEVELOPMENT MANAGER (BDM)

Ø Minimum Bachelor degree or higher in an appropriate field of study from reputable university

Ø Minimum 7-10 years of Oil & Gas Project Engineering

Ø Must have professional experience in multi-discipline engineering for the Oil & Gas and/or Petrochemical sector

Ø Must have experience in EPC contracts within the Oil & Gas and/or Petrochemical sectors (offshore and onshore)

Ø Must have high networking skills

Ø Must have good management skills

10. MECHANICAL PROJECT LEAD – ROTATING (MPL)

Ø Minimum Bachelor Degree in Mechanical major

Ø Minimum 7 years of mechanical engineering and design experience in the oil & gas industry

Ø Capable being a team leader with a proven track record of performance improvement

Ø Excellent communications in both written and spoken in English and Bahasa Indonesia

11. Electrical Designer

Ø Minimum Technical High School or equivalent with extensive experience in CAD and 3D design.

Ø Having detailed knowledge and experience in Electrical design in the oil and gas industry.

Ø Minimum 10 years experience in oil & gas industry in drafting design.

Ø Good communications in both written and spoken in English and Bahasa Indonesia.

12. PDMS Admin

Ø Minimum Diploma degree in Mechanical or Metallurgy engineering

Ø Minimum 7 years suitable experience in piping design and/or piping material control within the Oil & Gas or Petrochemical Industry.

Ø Experience in 3D plant layout, pipe routes, cable trays and ladders design and others designer jobs.

Ø Able to work in multi disciplines task.

Ø Excellent communication in both spoken and written in Indonesian and English

Role:

·Managed working practices, naming conventions for the databases, sites & zones of PDMS draft modul.

·Understand and comply with the requirements of the Project Specification, the relevant Procedures, Specifications, Standards and other Job Notes applicable to the project

·Creates and up-dates PDMS Cats and Specs of piping components, valves, structural shapes, cable trays and ladders as per project requirements

·Ensure that all Cat & Spec are completed within the allocated hours and in accordance with the programme

·Ensure that all Cat & Spec are technically correct, checked and approved in accordance with Company procedures

·Ensuring that the contents of the Review Model files reflect the PDMS Design.

·Extract material take off from PDMS model for input to related disciplines.

·Assist Piping Discipline Head to achieve the PDMS modelling and drafting are complete within the allocated hours

·Manage, control and apply changes to cat & Spec across the design works.

·Ensure that cat & Spec database are satisfied the project QA and technical requirements that represent all area of design

·Ensure to keep good order the filing systems of material specification and vendor’s data and/or drawings used to produce Cat & Spec.

·Ensure compliance with Company Standards and Procedures and SHEQ Regulation

·To read, understand and implement the Company Policy and the arrangements described in Company Management System documents

·Recommend improvements to company operating procedures

13. GA ADMIN (GA)

Ø Minimum Diploma degree in administration or any other field

Ø At least 1-3 years experience in the field of General Affair

Ø Good communications in both written & spoken in English and Bahasa Indonesia.

Please submit a comprehensive Resume (word format) with name of position in “subject” not later than 20 September 2012 to:

human.resources@amec-berca.co.id

(Only short-listed candidates will be contacted for further processes)

Vacancy for Offshore Projects, Indonesia 2012 |

Our client is currently seeking qualified individuals for the following posts for the project of offshore platforms fabrication and installation.

1. SENIOR GENERAL INSPECTOR (IF-01)
- Minimum 10 years in construction, quality control, welding material, NDT and painting from the oil & gas industries
- Minimum 4 years or 2 projects as Senior General Inspector
- Posses valid AWS/CSWIP/ASNT in the following areas:
o Welding (CSWIP 3.1 Level 2 or equivalent)
o Attended Radiographic, Ultrasonic, Magnetric Particle and Dye penetration courses.
- Posses valid MIGAS Inspector certificate
- Posses DNV Inspection certificate
- Minimum vocational certificate

2. SENIOR WELDING INSPECTOR (IF-02)- Minimum 8 years in structural and welding from oil & gas Industries
- Minimum 4 years or 2 projects as Structural & Welding Inspector in offshore platform fabrication from the oil & gas industries
- Posses valid AWS/CSWIP in welding CSWIP 3.1 level 2 or equivalent
- Posses valid migas inspector certificate
- Minimum vocational certificate

3. SENIOR MECHANICAL and PIPING INSPECTOR (IF-03)- Minimum 8 years as in Mechanical & Piping, welding, hydrotest, reinstatement test and insulation
- Minimum 4 years or 2 projects as Mechanical and Piping Inspector in offshore platform fabrication andhook-up commissioning from the oil & gas industries.
- Posses valid AWS/CSWIP in the following areas:
o Welding (CSWIP 3.1 or equivalent)
o NDT (CSWIP 3.9 or equivalent)
- Posses valid migas inspector certificate
- Minimum vocational certificate

4. SENIOR COATING / PAINTING INSPECTOR (IF-04)- Minimum 8 years in painting from the oil & gas industries
- Minimum 4 years or 2 projects as Painting Inspector in offshore platform fabrication from the oil & gas industries
- Posses valid coating inspection certificate issued by Institute of Material (IMM) or TAFE
- Minimum vocational certificate

5. SENIOR ELECTRICAL/INSTRUMENT INSPECTOR (IF-05)- Minimum 8 years as Electrical and Instrument Inspector in installation, inspection and testing from the oil & gas industries
- Minimum 4 years or 2 projects as Electrical and Instrument Inspector in offshore platform fabrication from the oil & gas industries
- Minimum vocational certificate in Electrical / Electronic / Control

6. SENIOR QUALITY / NDT INSPECTOR (IF-06)- Minimum 8 years as NDT Operator / Inspector from the oil & gas industries
- Minimum 3 years or 1 project as NDT Operator / Inspector from the oil & gas industries
- Possess valid CSWIP/ASNT in the following areas:
o Welding (CSWIP 3.4 level 2 or equivalent)
o Certified by examination from Radiographic, Ultrasonic, Magnetic, Eddy Current, UT Thickness measurement and Dye Penetration courses
- Minimum Vocational certificate

7. SENIOR STRUCTURE INSPECTOR (IF-07)- Minimum 8 years in Structure in offshore oil & gas industries
- Posses AWS/CSWIP or ASNT in th following area:
o Welding (CSWIP 3.1 or equivalent)
o NDT (CSWIP 3.9 or equivalent)
- Diploma in Civil Engineering

8. SENIOR PIPELINE INSPECTOR (IF-08)- Minimum 8 years in pipeline construction
- Minimum 5 years or 1 projects Pipeline construction from the oil & gas industries
- Certified as Welding Inspector
- NDT (CSWIP 3.9 or equivalent)
- Familiar with standard code ASME, ASTM, ANSI, ANT TC 1A, API, DNV, SNI
- Bachelor degrees in metallurgy or mechanical engineering

8. EXPEDITOR (IF-09)- Minimum 6 years as expeditor from the oil & gas industries
- Minimum 3 years or 2 project as Inspector & Expeditor from the oil & gas industries
- Diploma Technical

If interested, please send your application and your most recent resume in MS Word or PDF Format, with the position title as subject to :

epc_man@yahoo.comOnly shortlisted candidates will be contacted for further selection process

Pages

Monday, 10 September 2012

Recruitment for Construction Professionals for Qatar

Walk in Interview at Chennai on 18th Sept 2012

Excellent Salary & Other Benefits

No of Requirement : 4 No

About our Client : GCC is British Management Construction company in Qatar involved in Various top projects from Ministry and Private sector.

Job Description :

Estimator shall be responsible for the following but not be limited to the important activities:

i) Collection of tender inquiries and documents for the pre tender works.

ii) Preparation and submission of tenders/ quotations.

iii) Collection of quotations for various subcontracted items for the bidding of the new tenders.

iv) Site visits for the new tenders.

v) Calculation of quantities and variations for the bidding of new projects and post tendering.

vi) Submission of all tenders on time, collection of all post tender information.

vii) Management of all the documentations of estimating department

viii) Co-ordination with client/ consultant for new contracts.

ix) Submission of pre-qualification documents.

x) Verify the Quality, Safety and Environment requirements of the tenders. ( Rev.01)

xi) Give the feed back on Quality, Safety and Environmental requirements to QA/QC and HSE department. ( Rev.01)

xii) Implement and monitor the Quality, Safety and Environmental management in estimation department. (Rev.01)

Candidates will have good construction knowledge. Estimator will be able to produce fully analytical Tenders using CCS computer estimating package.

Graduates in B.E / B.Tech / Civil Engineering with 5-10 years plus experience in Estimation required. It is preferred each candidate have 3-5 years middle east experience and must have an ability to work with full a management team. Salary and conditions according to experience.

Candidates with relavent Industry May Walk In for Shortlisting / May forward their detailed resume to operation6@agpindia.com

Assuring Best of services

Recruitment for Construction Professionals for Qatar

Walk in Interview at Chennai on 18th Sept 2012

Excellent Salary & Other Benefits

About our Client : GCC is British Management Construction company in Qatar involved in Various top projects from Ministry and Private sector.

Job Description :

Total Requirements: 8 Persons

1. Prepare shop drawings with detailed complex joinery fit out related items.2. Take site measurements & surveys should it be required to develop details further.3. Prepare & maintain schedules & updating them periodically.4. Maintain a proper filling system of all works done.

Candidates with relavent Industry May Walk In for Shortlisting / May forward their detailed resume to operation6@agpindia.com

Recruitment for Construction Professionals for Qatar

Walk in Interview at Chennai on 18th Sept 2012

Excellent Salary & Other Benefits

No of Requirement : 16 No

About our Client : GCC is British Management Construction company in Qatar involved in Various top projects from Ministry and Private sector.

Job Description :

Degree/Diploma holders in Civil Engineering with around 2 – 5 years experience in ensuring compliance with

Quality in construction on project execution. Candidates with working experience in Oil & Gas

Industry will be given first preference. Knowledge in ISO is an additional advantage.

Candidates with relavent Industry May Walk In for Shortlisting / May forward their detailed resume to operation6@agpindia.com

Recruitment for Construction Professionals for Qatar

Walk in Interview at Chennai on 18th Sept 2012

Excellent Salary & Other Benefits

No of Requirement : 20 No

About our Client : GCC is British Management Construction company in Qatar involved in Various top projects from Ministry and Private sector.

Job Description :

Civil Degree / Diploma holders

1 to 3 years good experience working with Construction Projects

Candidates with relavent Industry May Walk In for Shortlisting / May forward their detailed resume to operation6@agpindia.com

Recruitment for Construction Professionals for Qatar

Walk in Interview at Chennai on 18th Sept 2012

Excellent Salary & Other Benefits

No of Requirement : 12 No

About our Client : GCC is British Management Construction company in Qatar involved in Various top projects from Ministry and Private sector.

Job Description :

Civil Degree / Diploma holders

3 to 5 years good experience working with Construction Projects

Candidates with relavent Industry May Walk In for Shortlisting / May forward their detailed resume to operation6@agpindia.com

Recruitment for a Facility Management Professionals – Qatar

Telephonic Interview

Qualification:

5 to 10 years as Facilities Manager in a leading Facilities Management company.

Should have managed multi story building / commercial establishments.

Should have managed hard services like HVAC Maintenance, Electrical, Generators, Plumbing, masonry etc and soft services like cleaning/housekeeping, mail room, reprography, landscaping etc.

Other skills:

Excellent communication skills, very good in Microsoft applications (especially MS Excel and Power Point etc), leadership skills, excellent client relationship skills, should be self-driven guy etc.

Qualification:

B.E in Mechanical Engineering with exposure of Electrical engineering

Salary:

QR.8000 + free accommodation, free food, free medication, yearly ticket, single status and other benefits as per Qatar labour law.

GOLDEN OPPORTUNITY FOR SALES ASSISTANT

IN SAUDI ARABIA

EXCELLENT SALARY + HOUSING + TRANSPORTATION ALLOWANCE

AGE : 22 – 32 Years

SHORTLISTING IS IN PROGRESS

(SHORTLISTED CANDIDATES WILL ONLY BE INTERVIEWED BY CLIENTS)

CLIENT’S FINAL INTERVIEW SHORTLY AT CHENNAI (During 2nd Week of Sept)

1. Prepare shop drawings with detailed complex joinery fit out related items.
2. Take site measurements & surveys should it be required to develop details further.
3. Prepare & maintain schedules & updating them periodically.
4. Maintain a proper filling system of all works done.