Drawing Office Supervisor
by Zakum Development Company [ZADCO] in Dubai/ UAE
Experience: 12 to 22 yrs.Posted on: 30 Mar
Job Description
Principal Accountabilities:
i.OPERATIONAL/ ADMINISTRATION
a.Initiate, review and update Drawing Office Procedures.
b.Review all drafting requests from business and support units. Sets priorities, allocates work assignments to drawing office staff in a multi-discipline setting. Disciplines include process, piping, mechanical, civil, structural, electrical, instrumentation and telecommunication.
c.Ensure that drawing office manpower and skill sets are sufficient to meet projected workload and optimize utilization of the available resources. Initiates requests to hire supplementary manpower and interviews/ recommends suitable candidates.
d.Prepare and manage Drawing Office Annual Operating Budget and for projects handled by the Section.
e.Review and approve the drafting work carried out “in-house” and by external contractors/ consultants, to ensure compliance with ZADCO standards and procedures.
f.Monitor and measure drawing office productivity and evaluates performance and approves man-hours spent by Drawing Office staff.
g.Recommend CAD training programs to upgrade skill levels of staff in AutoCAD and other intelligent add-on Softwares.
h.Provide work directions, guidance and training to UAE National Developees.
i.Explore the advancements in the industry and recommend hardware/software acquisition/ upgrades for improved performance of CAD system.
j.Liaise with external consultants and service suppliers to meet the day to day requirement for drawing office operation, e.g. HW/SW suppliers, contractors, drafting suppliers etc.
k.Produce Management Reports and conduct presentations on the Section’s targets, achievements and future plans, as and when required.
l.Ensure Company HSE Standards are fully complied by Drawing office staff and by contractor’s personnel. Initiates and implements plans to enhance Quality improvement of the Section.
i.OPERATIONAL/ ADMINISTRATION
a.Initiate, review and update Drawing Office Procedures.
b.Review all drafting requests from business and support units. Sets priorities, allocates work assignments to drawing office staff in a multi-discipline setting. Disciplines include process, piping, mechanical, civil, structural, electrical, instrumentation and telecommunication.
c.Ensure that drawing office manpower and skill sets are sufficient to meet projected workload and optimize utilization of the available resources. Initiates requests to hire supplementary manpower and interviews/ recommends suitable candidates.
d.Prepare and manage Drawing Office Annual Operating Budget and for projects handled by the Section.
e.Review and approve the drafting work carried out “in-house” and by external contractors/ consultants, to ensure compliance with ZADCO standards and procedures.
f.Monitor and measure drawing office productivity and evaluates performance and approves man-hours spent by Drawing Office staff.
g.Recommend CAD training programs to upgrade skill levels of staff in AutoCAD and other intelligent add-on Softwares.
h.Provide work directions, guidance and training to UAE National Developees.
i.Explore the advancements in the industry and recommend hardware/software acquisition/ upgrades for improved performance of CAD system.
j.Liaise with external consultants and service suppliers to meet the day to day requirement for drawing office operation, e.g. HW/SW suppliers, contractors, drafting suppliers etc.
k.Produce Management Reports and conduct presentations on the Section’s targets, achievements and future plans, as and when required.
l.Ensure Company HSE Standards are fully complied by Drawing office staff and by contractor’s personnel. Initiates and implements plans to enhance Quality improvement of the Section.
PROJECTS MANAGEMENT (For “As Building”& CADding jobs):
a.Manage and Supervise the activities related to the implementation of assigned projects from inception to completion and ensures that the projects are completed on time, within the budget and to the required quality.
b.Develop project objectives, execution strategy, work breakdown structure, Scope of Works etc.
c.Prepare preliminary man-hour/ cost estimates and implementation schedule for projects handled by EPS.
d.Direct and monitor the implementation of assigned projects including verification of bidder’s lists, preparation of ITT documents, Technical evaluation of bids etc.
e.Monitor and control the financial expenditure throughout the project and reviews proposed changes in order to optimize the cost.
f.Closely supervise and monitor the work of the contractors in liaison with the Project team to ensure that the project proceeds according to the contract and deal with any queries, problems and claims that might arise. Conducts periodic progress review meetings with the
a.Manage and Supervise the activities related to the implementation of assigned projects from inception to completion and ensures that the projects are completed on time, within the budget and to the required quality.
b.Develop project objectives, execution strategy, work breakdown structure, Scope of Works etc.
c.Prepare preliminary man-hour/ cost estimates and implementation schedule for projects handled by EPS.
d.Direct and monitor the implementation of assigned projects including verification of bidder’s lists, preparation of ITT documents, Technical evaluation of bids etc.
e.Monitor and control the financial expenditure throughout the project and reviews proposed changes in order to optimize the cost.
f.Closely supervise and monitor the work of the contractors in liaison with the Project team to ensure that the project proceeds according to the contract and deal with any queries, problems and claims that might arise. Conducts periodic progress review meetings with the
Salary:
Not Disclosed by Recruiter
Industry:
Oil and Gas, Energy, Power, Infrastructure
Functional Area:
Engineering Design, R&D
Role Category:
Engineering Design
Role:
Design Engineer
Keyskills:
Drawing Office Supervisor, Supervisor, CADWorx, GTX Raster CAD, Autocad
Desired Candidate Profile
Education:
(UG - B.Tech/B.E.) AND (PG - Any PG Course)
a.Engineering Degree or equivalent from a recognized college or Technical Institute.
b.Twelve years design drafting experience in oil and gas industry and 5 years in a senior supervisory level, including projects planning and execution.
c.Extensive experience in managing “As Building” and Draughting projects from conception to completion, within the approved cost and time schedule.
d.Ability to organize and plan multi-disciplinary design drafting work, to meet deadlines.
e.In-depth knowledge of the operation of a modern CAD based multi-discipline drawing office.
f.Excellent AutoCAD skills, Word Processing and Spreadsheet capability. A good understanding of AutoCAD enhancement programs e.g. CADWorx, GTX Raster CAD, Multi-steel and SmartPlant Suite of Applications
g.Strong leadership skills, with written, verbal, analytical and interpersonal skills.
h.Good command of English language.
b.Twelve years design drafting experience in oil and gas industry and 5 years in a senior supervisory level, including projects planning and execution.
c.Extensive experience in managing “As Building” and Draughting projects from conception to completion, within the approved cost and time schedule.
d.Ability to organize and plan multi-disciplinary design drafting work, to meet deadlines.
e.In-depth knowledge of the operation of a modern CAD based multi-discipline drawing office.
f.Excellent AutoCAD skills, Word Processing and Spreadsheet capability. A good understanding of AutoCAD enhancement programs e.g. CADWorx, GTX Raster CAD, Multi-steel and SmartPlant Suite of Applications
g.Strong leadership skills, with written, verbal, analytical and interpersonal skills.
h.Good command of English language.
Company Profile
Zakum Development Company [ZADCO]
A Leading Oil and Gas Company in UAE.
Contact Details
Executive Name:
HR
Contact Company:
Zakum Development Company ZADCO
Email Address:
Reference Id:
HRR-015-2012
Piping Engineer
by Zakum Development Company [ZADCO] in Dubai/ UAE
Experience: 10 to 20 yrs.Posted on: 30 Mar
Job Description
1. Experienced to carry out all piping engineering activities, from conceptual design to commissioning for the brown/green field onshore/offshore oil and gas projects.
2. Experienced in all piping engineering activities: Layout, Specifications, datasheets, Stress analysis, procurement support, construction support.
3. Worked as Piping Lead Engineer in a Engineering Consultancy involved in planning deliverables, design of engineering package, monitoring,
4. Develop documents for the procurement of all piping items and provide procurement support activities for the timely delivery of the piping items.
5. Working with client companies and review & approve the engineering work of Consultant/EPCM/EPC/PMC Contractors.
6. Contribute for preparation of scope of work for Engineering Consultant/EPCM/EPC/Construction Contractor etc, review their bids, issue clarifications, technical recommendation and support upto contract award.
7. Participate the review meeting Viz: Layout review, HAZOP, HAZID, Value engineering, Constructability review.
2. Experienced in all piping engineering activities: Layout, Specifications, datasheets, Stress analysis, procurement support, construction support.
3. Worked as Piping Lead Engineer in a Engineering Consultancy involved in planning deliverables, design of engineering package, monitoring,
4. Develop documents for the procurement of all piping items and provide procurement support activities for the timely delivery of the piping items.
5. Working with client companies and review & approve the engineering work of Consultant/EPCM/EPC/PMC Contractors.
6. Contribute for preparation of scope of work for Engineering Consultant/EPCM/EPC/Construction Contractor etc, review their bids, issue clarifications, technical recommendation and support upto contract award.
7. Participate the review meeting Viz: Layout review, HAZOP, HAZID, Value engineering, Constructability review.
Salary:
Not Disclosed by Recruiter
Industry:
Oil and Gas, Energy, Power, Infrastructure
Functional Area:
Site Engg., Project Management
Role Category:
Site Engineers
Role:
Construction-Heavy
Keyskills:
Piping, Piping Engineer, Stress Analysis, Procurement Support, Construction Support, Stress Analysis
Desired Candidate Profile
Education:
(UG - B.Tech/B.E. - Mechanical, Diploma, B.Sc) AND (PG - Any PG Course)
Minimum Requirements:
1. Bachelor Degree in Mechanical Engineering
2. 10 years and above working experience
3. with knowledge in CAESAR (Stress Analysis).
2. 10 years and above working experience
3. with knowledge in CAESAR (Stress Analysis).
Company Profile
Zakum Development Company [ZADCO]
A Leading Oil and Gas Company in UAE.
Contact Details
Executive Name:
HR
Contact Company:
Zakum Development Company ZADCO
Email Address:
Reference Id:
HRR-013-2012
Mechanical Engineer
by Zakum Development Company [ZADCO] in Dubai/ UAE
Experience: 15 to 20 yrs.Posted on: 30 Mar
Job Description
Principal Accountabilities:
1. Conduct in-house design and construction engineering of new plant facilities, in accordance with International Codes and Standards, Company Specifications and good engineering practices.
2. Conduct fitness for service on existing in-service static equipment and associated piping, to establish the Safe Maximum Allowable Working Pressure and service remnant life, to API 579-1/ASME FFS-1.
3. Conduct feasibility studies, in-house engineering for small to medium size projects.
4. Prepare/ provide mechanical input to the following technical documents:
- Statement of requirements
- Execution strategies
- Scope of work / services for new facilities and for modifications to existing equipment.
- Material requisitions as part of the Commercial Department’s purchase requisitions for new equipment.
- Engineering packages, including equipment specifications, datasheets, drawings etc.
- Consultant/ Engineer/ Contractor/ Vendor documentation reviews.
5. Carry out technical bid clarifications, assessments and evaluations on tendered equipment, engineering services and projects/ studies.
6. Review the design works and studies performed by Engineering Consultants and ensure that they are in accordance with the technical requirements. Review and approve drawings, specifications and technical; documents for all mechanical design related work.
7. Participate in site surveys of facilities to establish and identify actual requirements.
1. Conduct in-house design and construction engineering of new plant facilities, in accordance with International Codes and Standards, Company Specifications and good engineering practices.
2. Conduct fitness for service on existing in-service static equipment and associated piping, to establish the Safe Maximum Allowable Working Pressure and service remnant life, to API 579-1/ASME FFS-1.
3. Conduct feasibility studies, in-house engineering for small to medium size projects.
4. Prepare/ provide mechanical input to the following technical documents:
- Statement of requirements
- Execution strategies
- Scope of work / services for new facilities and for modifications to existing equipment.
- Material requisitions as part of the Commercial Department’s purchase requisitions for new equipment.
- Engineering packages, including equipment specifications, datasheets, drawings etc.
- Consultant/ Engineer/ Contractor/ Vendor documentation reviews.
5. Carry out technical bid clarifications, assessments and evaluations on tendered equipment, engineering services and projects/ studies.
6. Review the design works and studies performed by Engineering Consultants and ensure that they are in accordance with the technical requirements. Review and approve drawings, specifications and technical; documents for all mechanical design related work.
7. Participate in site surveys of facilities to establish and identify actual requirements.
8. Provide technical assistance, coordination and liaison with other discipline engineers within the Engineering and Projects, Business Units, Support Units on all aspects of Engineering /technical matters, design reviews and audits.
9. Up to date with the latest Static Equipment Codes & Standards.
10. Able to use the Company static equipment software and ensure it is the latest version with respect to the International Codes and Standards.
11. Provide input/ update to Company Engineering Specifications, Procedures and Philosophies.
12. Participate in technical audits on Consultant/ Engineer/ Contractor/ Vendor offices, during pre-qualification and to monitor their performance during a project.
13. Participate as Company representative specialist on static equipment inspection and performance testing at Vendor’s workshop or at Company Sites.
14. Impart training particular to UAE nationals to meet their integration targets.
9. Up to date with the latest Static Equipment Codes & Standards.
10. Able to use the Company static equipment software and ensure it is the latest version with respect to the International Codes and Standards.
11. Provide input/ update to Company Engineering Specifications, Procedures and Philosophies.
12. Participate in technical audits on Consultant/ Engineer/ Contractor/ Vendor offices, during pre-qualification and to monitor their performance during a project.
13. Participate as Company representative specialist on static equipment inspection and performance testing at Vendor’s workshop or at Company Sites.
14. Impart training particular to UAE nationals to meet their integration targets.
Salary:
Not Disclosed by Recruiter
Industry:
Oil and Gas, Energy, Power, Infrastructure
Functional Area:
Engineering Design, R&D
Role Category:
Engineering Design
Role:
Design Engineer
Keyskills:
Mechanical, Mechanical Engineer, Document Management System, Document Management
Desired Candidate Profile
Education:
(UG - Diploma - Mechanical, B.Tech/B.E. - Mechanical, B.Sc) AND (PG - Any PG Course)
Minimum Requirements:
BSc in Mechanical Engineering from a recognised Technical University.
Not less than 15 years experience in the oil & gas industry, of which at least 10 years related to design and construction engineering of static equipment, and also in writing equipment specifications.
Fluent in both spoken and written English, particularly technical report writing.
Proficient with mechanical static equipment design standards, related to the oil and gas industry, with respect to ASME 8 Division 1 & 2, TEMA, API 660, API 650, API 579-1/ ASME FFS-1 and relevant International Standards.
Computer literate with experience on technical software related to static equipment, eg PVElite, Mathcad or equivalent.
Computer Literate with experience using Microsoft Office, Visio and SmartPlant Foundation Engineering Document Management System (EDMS).
Self-motivated and ability to organise and prioritise work to meet dead lines, work in a multi-discipline engineering team in conducting conceptual studies, FEED and detailed engineering.
Experienced in carrying out design analysis of pressure vessels, namely fatigue, thermal and discontinuity stresses, vessel support and nozzle reinforcement.
BSc in Mechanical Engineering from a recognised Technical University.
Not less than 15 years experience in the oil & gas industry, of which at least 10 years related to design and construction engineering of static equipment, and also in writing equipment specifications.
Fluent in both spoken and written English, particularly technical report writing.
Proficient with mechanical static equipment design standards, related to the oil and gas industry, with respect to ASME 8 Division 1 & 2, TEMA, API 660, API 650, API 579-1/ ASME FFS-1 and relevant International Standards.
Computer literate with experience on technical software related to static equipment, eg PVElite, Mathcad or equivalent.
Computer Literate with experience using Microsoft Office, Visio and SmartPlant Foundation Engineering Document Management System (EDMS).
Self-motivated and ability to organise and prioritise work to meet dead lines, work in a multi-discipline engineering team in conducting conceptual studies, FEED and detailed engineering.
Experienced in carrying out design analysis of pressure vessels, namely fatigue, thermal and discontinuity stresses, vessel support and nozzle reinforcement.
Company Profile
Zakum Development Company [ZADCO]
A Leading Oil and Gas Company in UAE.
Contact Details
Executive Name:
HR
Contact Company:
Zakum Development Company ZADCO
Email Address:
Reference Id:
HRR-016-2012
Sr.Rotating / Static Engineer - Offshore - Malaysia
by HCR Global services in Malaysia
Experience: 10 to 20 yrs.Posted on: 30 Mar
Job Description
Should have exposure in static / Rotating equipment Design in Oil & Gas with at least 2 to 3 yrs Offshore industr. Mechanical Design of Shell & Tube Heat Exchangers. Mechanical design and detail engineering of Air Cooled Heat Exchangers for Oil & Gas
Salary:
Not Disclosed by Recruiter
Industry:
Oil and Gas, Energy, Power, Infrastructure
Functional Area:
Engineering Design, R&D
Role Category:
Engineering Design
Role:
Senior. Design Engineer
Keyskills:
Offshore, off shore, , FEED, Detailed Engineering, rotary, Rotating, Static, Vessel, Exchanger
Desired Candidate Profile
Education:
(UG - B.Tech/B.E. - Mechanical) OR (PG - M.Tech - Mechanical)
Minimum 6-20 yrs experience in the offshore oil&gas industry.Experienced in (FEED, conceptual and detailed design).Experienced with offshore rotating / Static Design.
Company Profile
HCR Global services
Our Client is Leading International engineering services group, focused in engineering design for the oil and gas industry. HCR GLOBAL SERVICES is Leading International Manpower Consultant
Contact Details
Executive Name:
Mr.Dinesh
Email Address:
Sr.Civil/Strcutural Desgin Engineer - Offshore - Malaysia
by HCR Global services in Malaysia
Experience: 8 to 13 yrs.Posted on: 30 Mar
Job Description
Exposure of Structure design for Offshore Oil & gas Project Detail engineering for Civil & Structural work in Offshore oil & gas.Topside Module In place analysis - Review, Lift analysis, Pipe Rack analysis,Secondary structure design,Equipment & pipe.
Salary:
Not Disclosed by Recruiter
Industry:
Oil and Gas, Energy, Power, Infrastructure
Functional Area:
Engineering Design, R&D
Role Category:
Engineering Design
Role:
Senior. Design Engineer
Keyskills:
Topside, Offshore, off shore, NORSOK, AISC,FPSO, Duct, design, FEED, jacket ,Detailed Engineering
Desired Candidate Profile
Education:
(UG - B.Tech/B.E. - Civil) OR (PG - M.Tech - Civil)
Minimum 6-20 yrs experience in the offshore oil&gas industry.Experienced in topsides and jacket design (FEED, conceptual and detailed design).Experienced with offshore structural analysis packages. Proficiency in SACS/MicroSAS/SEASAM.
Company Profile
HCR Global services
Leading International engineering services group, focused in engineering design for the oil and gas industry.
Contact Details
Executive Name:
Mr.Dinesh
Email Address:
Manager-Mechanical Engineering / Sr. Mechanical Engineer
by Organica Water Pvt. Ltd. in Delhi/NCR
Experience: 10 to 15 yrs. | Salary: INR 15,00,000 - 20,00,000 P.A | Opening(s): 1Posted on: 30 Mar
Job Description
Responsibilities:
- Carry out mechanical engineering (layouts, piping, equipment modeling, sizing and specifications) as part of the engineering team to develop a complete solution for a Wastewater Treatment Plant (WWTP).
- Estimation of capital and operating costs of WWTP.
- Participate in preparation of technical offers and tenders.
- Optimize the design of mechanical system components or equipment.
- Supervise and coordinate work activities of subordinates.
- Identify needs and opportunities for training/development of team members.
- Supervise and advise construction team for installation, testing and commissioning of mechanical systems and equipment.
- Coordinate mechanical design with satellite offices.
- Carry out mechanical engineering (layouts, piping, equipment modeling, sizing and specifications) as part of the engineering team to develop a complete solution for a Wastewater Treatment Plant (WWTP).
- Estimation of capital and operating costs of WWTP.
- Participate in preparation of technical offers and tenders.
- Optimize the design of mechanical system components or equipment.
- Supervise and coordinate work activities of subordinates.
- Identify needs and opportunities for training/development of team members.
- Supervise and advise construction team for installation, testing and commissioning of mechanical systems and equipment.
- Coordinate mechanical design with satellite offices.
Salary:
INR 15,00,000 - 20,00,000 P.A
Industry:
Water Treatment, Waste Management
Functional Area:
Engineering Design, R&D
Role Category:
Engineering Design
Role:
Senior. Design Engineer
Keyskills:
Mechanical Engineer, Civil Engineer - Hydraulics
Desired Candidate Profile
Education:
(UG - B.Tech/B.E. - Mechanical, Civil) AND (PG - Any PG Course - Any Specialization, Post Graduation Not Required)
Qualifications:
- Diploma/Degree in Mechanical Engineering or Civil Engineering (hydraulic)
- More than 5 years experience in a variety of mechanical engineering positions
- More than 3 years experience in Wastewater Treatment
- Basic knowledge about wastewater treatment and technologies
- Knowledge of rotating equipment, piping systems, fabrication, tanks, valves etc.
- Expert skills at MS Office (Word, Excel and Power Point)
- Extensive knowledge about Mechanical design softwares
- Excellent command over written and spoken English
- Diploma/Degree in Mechanical Engineering or Civil Engineering (hydraulic)
- More than 5 years experience in a variety of mechanical engineering positions
- More than 3 years experience in Wastewater Treatment
- Basic knowledge about wastewater treatment and technologies
- Knowledge of rotating equipment, piping systems, fabrication, tanks, valves etc.
- Expert skills at MS Office (Word, Excel and Power Point)
- Extensive knowledge about Mechanical design softwares
- Excellent command over written and spoken English
Key competencies:
- Ability to work in a team, self-motivated
- Result-orientated
- Ability to prioritize
- Good communication and problem solving skills
- Ability to work in a team, self-motivated
- Result-orientated
- Ability to prioritize
- Good communication and problem solving skills
Company Profile
Organica Water is a global provider of innovative solutions for the treatment and recycling of wastewater. Over the past two decades Organica has developed a truly unique approach, enabling customers all over the world to address urban water challenges in a cost and resource efficient manner. Organica’s solutions are all founded on the fundamental belief that nature provides the most efficient means to treat wastewater, offering significant cost savings compared to other solutions, and harmonious integration into modern urban lifestyles. Established in 1998 as a traditional design-build company, over its first nine years the company built 75+ wastewater treatment plants (WWTPs) for clients ranging from large municipalities to multinationals such as GM, Audi, Alcoa, Shell, and GE. In 2007 Organica sold its design-build business to focus exclusively on the commercialization of its own Integrated Fixed Film Activated Sludge (IFAS) solution. Today Organica is the world leader in Fixed-Bed Biofilm Activated Sludge (FBAS) technology, with dozens of operating references all over the world.
Contact Details
Executive Name:
Parakh Oswal
Address:
Elegance Tower Jasola Mathura Road NEW DELHI,Delhi,India 110025
Email Address:
