Lead Piping - Mechanical Engg, with metereing sikd, cadworx, at Pune
• Should have a experience in high and low rise concrete Building Structural Design.
• Good command over structural analysis and design using finite element software such as Etabs, Safe, Prokon, Medas,
• Exporting the building geometry using DXF from architectural autocad drawings either his own or using draft person.
• Developing initial building 3D-model using structural finite element software Etabs, knowledge of all statics and load combinations for gravity, wind and seismic, hydrostatic loads.
• Providing the structural approximate sizing based on approximate design and initial model run.
• provide the vertical and horizontal loads at pile heads out of worst load combination from 3D-analysis, for geotechnical engineers to provide pile design.
• Good knowledge of static and dynamic analysis, working out scale factors in each directions, checking the lateral translations, building fundamental periods, building accelerations against the design code requirements or specialists literature
• Should be able to produce all service load combination to the building performance for serviceability and ultimate design of building components.
• Ultimate design for vertical elements such as core walls, columns using Etabs design option, extracting the analysis and design out-put and summarising in excel sheets.
• Developing the general arrangement plans based on initial design at basement car park, ground floors, podium levels and typical higher floors.
• Guide draft persons for drawing production for general arrangement plans, column/beam/ slab schedules, establishing the drawing list, drawing sizes and detailing formats.
• Guiding the design engineers for analysis, design and detailing.
• Preparing scope of soil investigation works.
• Interpreting soil investigation report and working out the parameters such as, support spring constants, soil sub-grade reactions, safe bearing capacity etc.
• Assisting architect with structural inputs during the design development stage.
• Coordination with MEP engineers and provide structural solutions to accommodate building services.
• Review Soil Investigation interim report together with geotechnical consultants to evaluate the suitable foundation system, dewatering strategy, piling platform level, piling toe & cut off levels.
A Fortune 500 company, AECOM serves clients in more than 130 countries and had revenue of $8.1 billion during the 12 months ended Dec. 31, 2011. More information on AECOM and its services can be found at www.aecom.com.
Specialties
Architecture, Design + Planning, Building Engineering, Transportation, Construction Services, Program Management, Program, Cost, Consultancy, Water, Energy, Environment, Government, Oil + Gas, Mining, Economics.
Job DescriptionSend me Jobs like this
-Experience of handling/guiding a team of engineers & designers.
-Working in global environment.
-Developing a team & taking it to higher levels.
-Preparing datasheets, requisitions, specification.
-Vendor & Technical bid evaluation.
-Working in global environment.
-Developing a team & taking it to higher levels.
-Preparing datasheets, requisitions, specification.
-Vendor & Technical bid evaluation.
Salary:
Not Disclosed by Recruiter
Industry:
Oil and Gas, Energy, Power, Infrastructure
Functional Area:
Engineering Design, R&D
Role Category:
Engineering Design
Role:
Tech. Lead/ Project Lead
Keyskills:
Metering skid, Coompressor skids, Caesar, CAdworks
Desired Candidate Profile
Education:
(UG - B.Tech/B.E. - Mechanical) AND (PG - Any PG Course - Any Specialization, Post Graduation Not Required)
Checking of layouts, GA drawings, isometrics, Fabrication drawings.Exposure to 3D modeling SW- Propipe, Autoplant, Sspipe, CADWorx. Pressure drop calculations, pipe thickness calc. Experience in project execution, site exposure and team mgmt.
Company Profile
SAP brothers
Client of SAP Brothers
Contact Details
Executive Name:
Ashutosh or Savita
Email Address:
Telephone:
022-65297839
Reference Id:
ST
Project Manager Civil(Structural)
Job DescriptionSend me Jobs like this
PROJECT MANAGERS-STRUCTURAL
Location-NOIDA
Education: BE (Civil ), ME (Structure)
Experience: 6-13 years
Location-NOIDA
Education: BE (Civil ), ME (Structure)
Experience: 6-13 years
• Should have a experience in high and low rise concrete Building Structural Design.
• Good command over structural analysis and design using finite element software such as Etabs, Safe, Prokon, Medas,
• Exporting the building geometry using DXF from architectural autocad drawings either his own or using draft person.
• Developing initial building 3D-model using structural finite element software Etabs, knowledge of all statics and load combinations for gravity, wind and seismic, hydrostatic loads.
• Providing the structural approximate sizing based on approximate design and initial model run.
• provide the vertical and horizontal loads at pile heads out of worst load combination from 3D-analysis, for geotechnical engineers to provide pile design.
• Good knowledge of static and dynamic analysis, working out scale factors in each directions, checking the lateral translations, building fundamental periods, building accelerations against the design code requirements or specialists literature
• Should be able to produce all service load combination to the building performance for serviceability and ultimate design of building components.
• Ultimate design for vertical elements such as core walls, columns using Etabs design option, extracting the analysis and design out-put and summarising in excel sheets.
• Developing the general arrangement plans based on initial design at basement car park, ground floors, podium levels and typical higher floors.
• Guide draft persons for drawing production for general arrangement plans, column/beam/ slab schedules, establishing the drawing list, drawing sizes and detailing formats.
• Guiding the design engineers for analysis, design and detailing.
• Preparing scope of soil investigation works.
• Interpreting soil investigation report and working out the parameters such as, support spring constants, soil sub-grade reactions, safe bearing capacity etc.
• Assisting architect with structural inputs during the design development stage.
• Coordination with MEP engineers and provide structural solutions to accommodate building services.
• Review Soil Investigation interim report together with geotechnical consultants to evaluate the suitable foundation system, dewatering strategy, piling platform level, piling toe & cut off levels.
Salary:
Not Disclosed by Recruiter
Industry:
Construction, Engineering, Cement, Metals
Functional Area:
Engineering Design, R&D
Role Category:
Engineering Design
Role:
Senior. Design Engineer
Keyskills:
Project Manager, Project Engineer, Principal Engineer
Desired Candidate Profile
Education:
Please refer to the Job description above
(UG - B.Tech/B.E. - Civil) OR (PG - Post Graduation Not Required, M.Tech - Civil)
Company Profile
Spectral An AECOM Company
AECOM is a leader in all of the key markets that it serves. AECOM provides a blend of global reach, local knowledge, innovation, and technical excellence in delivering solutions that create, enhance and sustain the world's built, natural and social environments.A Fortune 500 company, AECOM serves clients in more than 130 countries and had revenue of $8.1 billion during the 12 months ended Dec. 31, 2011. More information on AECOM and its services can be found at www.aecom.com.
Specialties
Architecture, Design + Planning, Building Engineering, Transportation, Construction Services, Program Management, Program, Cost, Consultancy, Water, Energy, Environment, Government, Oil + Gas, Mining, Economics.
Contact Details
Executive Name:
Vivek Misra
Contact Company:
AECOM India Private Limited
Email Address:
Telephone:
1204049000
Reference Id:
PMCIVIL
Head Design Factories
Job DescriptionSend me Jobs like this
Design&coordination
Structures,Pre Engineered Buildings
Mechanical Electrical & Sanitary Services,Piping
Auto Plants,Warehouses & Logistic Parks
Factory Sheds,Glass,Pharma &FMCG plants & Workshops
Structures,Pre Engineered Buildings
Mechanical Electrical & Sanitary Services,Piping
Auto Plants,Warehouses & Logistic Parks
Factory Sheds,Glass,Pharma &FMCG plants & Workshops
Salary:
INR 20,00,000 - 25,00,000 P.A
Industry:
Construction, Engineering, Cement, Metals
Functional Area:
Engineering Design, R&D
Role Category:
Engineering Design
Role:
Senior. Design Engineer
Keyskills:
Design RCC, Steel, Structures, Pre - Stressed Concrete, STAADPRO, ETABS, Seismic Analysis, Building Codes
Desired Candidate Profile
Education:
(UG - B.Tech/B.E. - Civil) OR (PG - M.Tech - Civil)
Post graduate civil engineers experienced in design of RCC & steel structures in multi disciplinary projects like factory , stadium and metros.
Company Profile
Leading consultants for their clients –leaders in construction Industry.
Contact Details
Executive Name:
Sushil Kumar
Contact Company:
Impetus Corporate Solutions
Address:
C 407, Mega centre Hadapsar Pune,Maharashtra,India 411018
Email Address:
Telephone:
91-20-26890418
Reference Id:
Temporary Staffing Solutions
Executive Search
Turn-key Projects
We don’t endow you employment opportunities like our counterparts; we help you in breaking the barrier that comes in your approach of focused growth!
ICS 926
Opening for Lead Structural Engineer (Hydrocarbon)
Job DescriptionSend me Jobs like this
Exp in FEED, Conceptual engineering, analysis, design and detailed engineering, EPC projects on Offshore structures in the Oil & Gas sector.
Prepare designs, sketches and reports with supporting calculations for projects & assist in detailed drawing.
Prepare designs, sketches and reports with supporting calculations for projects & assist in detailed drawing.
Salary:
Best in the Industry
Industry:
Oil and Gas, Energy, Power, Infrastructure
Functional Area:
Site Engg., Project Management
Role Category:
Site Engineers
Role:
Structural Engineer-Building
Keyskills:
SACS, STAAD Pro, MATHCAD, FPSO, FSO, ACI, AISC, API, ASTM, AASHTO, BS, UBC / IBC, oil & gas, EPC, power, Floating Production Storage & Offtake, design, structural
Desired Candidate Profile
Education:
(UG - Any Graduate - Any Specialization, Graduation Not Required) AND (PG - Any PG Course - Any Specialization, Post Graduation Not Required)
B.E or Equivalent
User of SACS
Engg & design of FPSO projects
Design works in Hydrocarbon facilities
Participate in the planning of projects, Quality Assurance & Safety as required
User of SACS
Engg & design of FPSO projects
Design works in Hydrocarbon facilities
Participate in the planning of projects, Quality Assurance & Safety as required
Company Profile
VertX Solutions
Recruitment SolutionsTemporary Staffing Solutions
Executive Search
Turn-key Projects
We don’t endow you employment opportunities like our counterparts; we help you in breaking the barrier that comes in your approach of focused growth!
Contact Details
Executive Name:
Mr. Vigneshwaran S
Email Address:
Telephone:
044-42235054
Reference Id:
LSE-MfgE-WP-002
SR. PIPE STRESS ENGINEER
Job DescriptionSend me Jobs like this
REQUIRED SR. PIPE STRESS ENGINEER FOR PUNE & ORISSA LICATION
EXPERIENCE 10 YEARS IN POWER PLANT & OIL, GAS, REFINERY & PETROCHEMICAL.
Salary:
INR 8,00,000 - 18,00,000 P.A
Industry:
Oil and Gas, Energy, Power, Infrastructure
Functional Area:
Engineering Design, R&D
Role Category:
Engineering Design
Role:
Senior. Design Engineer
Keyskills:
POWER PLANT, OIL & GAS, REFINERY, PETROCHEMICAL
Desired Candidate Profile
Education:
Please refer to the Job description above
(UG - B.Tech/B.E. - Mechanical) AND (PG - Any PG Course - Any Specialization, Post Graduation Not Required)
Company Profile
Our Profile: KUSHAL is pioneer in the field of providing deployment of experienced engineers since 1994 to various clients in India & Abroad for setting up of Refinery, Oil / Gas, Petrochemical, Chemical, Power & Infrastructure projects.
Contact Details
Executive Name:
SARITA YADAV
Contact Company:
Kushal Engineering Enterprises
Address:
522, Corporate Centre, Nirmal Lifestyles L.B.S. Marg, Mulund (W), MUMBAI MUMBAI,Maharashtra,India 400080
Email Address:
Telephone:
022-41556155
MECHANICAL PIPING ENGINEER
Job DescriptionSend me Jobs like this
REQUIRED MECHANICLA PIPING ENGINEER
HAVING EXP. IN CONSTRUCTION ACTIVIES
EXP. 10+
BE IN MECHANICAL ENGINEERING
LOCATION : PANIPAT & PARADEEP, ORISSA
Salary:
INR 8,00,000 - 18,00,000 P.A
Industry:
Oil and Gas, Energy, Power, Infrastructure
Functional Area:
Site Engg., Project Management
Role Category:
Site Engineers
Role:
Construction-Heavy
Keyskills:
OIL & GAS, REFINERY, PETROCHEMICAL
Desired Candidate Profile
Education:
Please refer to the Job description above
(UG - B.Tech/B.E. - Mechanical) AND (PG - Any PG Course - Any Specialization, Post Graduation Not Required)
Company Profile
Our Profile: KUSHAL is pioneer in the field of providing deployment of experienced engineers since 1994 to various clients in India & Abroad for setting up of Refinery, Oil / Gas, Petrochemical, Chemical, Power & Infrastructure projects.
Contact Details
Executive Name:
SARITA YADAV
Contact Company:
Kushal Engineering Enterprises
Address:
522, Corporate Centre, Nirmal Lifestyles L.B.S. Marg, Mulund (W), MUMBAI MUMBAI,Maharashtra,India 400080
Email Address:
Telephone:
022-41556155
0 comments:
Post a Comment