Project Engineer/Coordinator
Dear all,
We are looking for the project engineer/coordinator. Work scope and requirement as below:
- to deal with governments agencies to comply to the Malaysian regulations i.e DOSH, DOE, Marine Dept, Port & Harbour Dept,
- Based in Shell office, Damansara.
- Must have at least 5 years experience
- Good communication skill
For those who are interested, kindly please forward your resume toabdulaziz.hamzah@jpkenny.com.my
Oil and Gas Jobs in Kuala Lumpur
Latest Job Vacanies in Kuala Lumpur.
1) Instrument Manager
- Malaysian / Local
- Posses a degree in electronic,instrumentation or Chemical Engineering background
- Minimum 10 years experience with at least 5 years experience in similar capacity in Oil & Gas.
- Able to interpret technical drawings,manuals,policies and procedures.
- Experience in instrument installation or commissioning
2) Construction Management Manager
- Malaysian / Local
- Candidates must ensure good progress quality of work at site that meets client’s requirements.
· At least 10 years of working experience in construction field preferably in Oil & Gas and Petrochemical industry or equivalent
· Able to prepare detail Construction Schedule and monitoring.
· Able to being mobilized to Construction Site (Short/Long Term)
· To coordinate construction schedules, manning schedules and review each sub-contractor’s work programme (manpower and equipment deployment, rate of work progress, etc.)
· Ability to work in teams or as independent, possess excellent communication and interpersonal skills.
· Highly motivated to learn and will put in the long hours when required
3) Electrical Engineer
- Malaysian / Local
- Posses a degree in electrical Engineering
- At least 5 years of working experience preferably in Oil & Gas Indsutr
· Capable to prepare electrical deliverables such as Single Line Diagram, Load Schedule, Motor Control Schedule, Cable Schedule, Cable routing drawing, Power and Control drawing, Area Classification drawing, grounding drawing, etc
· Sufficient knowledge of International Codes & Standards in relation to Electrical Design.
· Able to undertake works in electrical design up to construction at site (supervision).
· Experience in Project Engineering, Preparation of Electrical Inquiry Documents and commercial/technical Bid Evaluation. MTO and Cost Estimation and Inter-Discipline coordination.
· Familiar with Electrical Equipments such as Transformers, HV & LV Switchgear, MCC, Motors, UPS, LCS, Communication equipments, etc.
· Able to perform Electrical calculation such as Cable sizing/Voltage Drop calculation, Short circuit study, etc.
4) Civil & Structure Engineer
· Possess a Degree in Civil Engineering from a recognized university.
· At least 4 years of working experience in Civil & Structural Design in Oil & Gas, Petrochemical industries.
· Experience in Oil & Gas project would be an advantage.
· Knowledgeable to operate STAAD pro, AutoCAD and ESTEEM.
· Able to do BQ estimation for cost estimation and as-built purpose.
· Able to do inter-discipline co-ordination and possess good communication skills with clients and sub-contractor.
Must be able to work in group .
5) Layout & Piping Engineer
· Candidate must possess at least Degree in Mechanical, Chemical or Material Engineering or equivalent.
· At least 5 – 10 years of piping engineering design experience in Oil & Gas,Petrochemical industries.
· Basic knowledge of piping stress analysis and piping materials.
· Familiar with the international code and standards used in piping materials and good knowledge of ASME31.3, ASME, API, PTS, SHELL DEP, etc.
· Good knowledge and ability in Plant Layout Planning and Detailed Piping Design in view of Construction, Process Flow Scheme, Machinery Operation etc.
· Able to carry out site survey in order to gain required information and/or verification of existing plant documentation.
6)Piping Designer
·Posses Diploma in Mechanical or Material Engineering or Certificate in Mechanical Drafting.
· Minimum 5 years of piping design experience in Oil & Gas, Petrochemical industries.
· Good knowledge in drawing preparation of Plot Plan, Key Plan, Underground and Aboveground Piping Plan, Detailed Pipe Support and Construction Isometric.
· Good knowledge and ability to prepare civil information and mechanical information such as Pipe Rack, Platform Structure, Nozzle Orientation, Vessel Clip, etc.
· Having previous experience handling revamp project
· Able to carry out site survey in order to gain required information and/or verification of existing plant documentation.
· Able to work in team and posses excellent interpersonal, communication and writing skills.
· Good skill in the application of Auto-Cad.
· Knowledge in most commonly used software (Microstation) and 3D design exposure would be an advantage.
Send your resume/cv to shamsulsaiman1972@gmail.com
1) Instrument Manager
- Malaysian / Local
- Posses a degree in electronic,instrumentation or Chemical Engineering background
- Minimum 10 years experience with at least 5 years experience in similar capacity in Oil & Gas.
- Able to interpret technical drawings,manuals,policies and procedures.
- Experience in instrument installation or commissioning
2) Construction Management Manager
- Malaysian / Local
- Candidates must ensure good progress quality of work at site that meets client’s requirements.
· At least 10 years of working experience in construction field preferably in Oil & Gas and Petrochemical industry or equivalent
· Able to prepare detail Construction Schedule and monitoring.
· Able to being mobilized to Construction Site (Short/Long Term)
· To coordinate construction schedules, manning schedules and review each sub-contractor’s work programme (manpower and equipment deployment, rate of work progress, etc.)
· Ability to work in teams or as independent, possess excellent communication and interpersonal skills.
· Highly motivated to learn and will put in the long hours when required
3) Electrical Engineer
- Malaysian / Local
- Posses a degree in electrical Engineering
- At least 5 years of working experience preferably in Oil & Gas Indsutr
· Capable to prepare electrical deliverables such as Single Line Diagram, Load Schedule, Motor Control Schedule, Cable Schedule, Cable routing drawing, Power and Control drawing, Area Classification drawing, grounding drawing, etc
· Sufficient knowledge of International Codes & Standards in relation to Electrical Design.
· Able to undertake works in electrical design up to construction at site (supervision).
· Experience in Project Engineering, Preparation of Electrical Inquiry Documents and commercial/technical Bid Evaluation. MTO and Cost Estimation and Inter-Discipline coordination.
· Familiar with Electrical Equipments such as Transformers, HV & LV Switchgear, MCC, Motors, UPS, LCS, Communication equipments, etc.
· Able to perform Electrical calculation such as Cable sizing/Voltage Drop calculation, Short circuit study, etc.
4) Civil & Structure Engineer
· Possess a Degree in Civil Engineering from a recognized university.
· At least 4 years of working experience in Civil & Structural Design in Oil & Gas, Petrochemical industries.
· Experience in Oil & Gas project would be an advantage.
· Knowledgeable to operate STAAD pro, AutoCAD and ESTEEM.
· Able to do BQ estimation for cost estimation and as-built purpose.
· Able to do inter-discipline co-ordination and possess good communication skills with clients and sub-contractor.
Must be able to work in group .
5) Layout & Piping Engineer
· Candidate must possess at least Degree in Mechanical, Chemical or Material Engineering or equivalent.
· At least 5 – 10 years of piping engineering design experience in Oil & Gas,Petrochemical industries.
· Basic knowledge of piping stress analysis and piping materials.
· Familiar with the international code and standards used in piping materials and good knowledge of ASME31.3, ASME, API, PTS, SHELL DEP, etc.
· Good knowledge and ability in Plant Layout Planning and Detailed Piping Design in view of Construction, Process Flow Scheme, Machinery Operation etc.
· Able to carry out site survey in order to gain required information and/or verification of existing plant documentation.
6)Piping Designer
·Posses Diploma in Mechanical or Material Engineering or Certificate in Mechanical Drafting.
· Minimum 5 years of piping design experience in Oil & Gas, Petrochemical industries.
· Good knowledge in drawing preparation of Plot Plan, Key Plan, Underground and Aboveground Piping Plan, Detailed Pipe Support and Construction Isometric.
· Good knowledge and ability to prepare civil information and mechanical information such as Pipe Rack, Platform Structure, Nozzle Orientation, Vessel Clip, etc.
· Having previous experience handling revamp project
· Able to carry out site survey in order to gain required information and/or verification of existing plant documentation.
· Able to work in team and posses excellent interpersonal, communication and writing skills.
· Good skill in the application of Auto-Cad.
· Knowledge in most commonly used software (Microstation) and 3D design exposure would be an advantage.
Send your resume/cv to shamsulsaiman1972@gmail.com
Rotary Equipment Specialist Jobs
Camino Asia Pte.Ltd is a Global specialist Recruitment and Engineering services company. Our clients are among the top EPC companies in the world. Camino services them across Asia, Middle East and in the United States.
We have our full fledged operations in USA, UAE, Singapore, India and associates in Philippines and China. Our MNC client is one of the largest global oil service companies that engineers, builds, maintains and modifies oil and gas production facilities, FPSO's Etc.
For more details please contact siti.amizah@caminoasia.com
Rotary Equipment Specialist
Job Description:
As a Rotary Equipment specialist, you will be a part of the Regional Reliability Engineering Team. Your key role would be to help ensure that all rotary machines are maintained using best practice maintenance strategies that result in required reliability performance of plant machinery and systems at optimal cost.
Principal responsibilities
• Primary focus on in-house operations and maintaining of existing machinery.
• Bring in-house expertise in the maintenance of rotary machines including expansion turbines throughout the Region. Train the local maintenance staff on the maintenance best practices to the level of OEM engineers.
• Optimize/ reduce maintenance spend on spares through assessing the condition of ex-service components, reconditioning removed components etc.
• Take care of emergent events and supervise rectification of failed equipment including engineering management of change (MOC) compliance, key decision making and determination of root cause etc.
• Working with regions, individual plants, RE, Remote Operating Centre (ROC) and Power Engineering (PE) teams, establish a quarterly Enterprise Asset Management (EAM) managed comprehensive key equipment health review process and report on developing issues, changes in status, and recommended actions and mitigation (include vibration, oil, catalyst, thermography, cooler approach, machine efficiency, cooling system)
• Maintain a data base of CBM best practice by plant category and equipment type, including both technical scope and business practice.
• Provide a monthly management report on CBM activities
Levels of engagement
• Work with the country / site maintenance teams to make sure that the rotary machines are maintained as per the best practices.
• Work with global team of rotary machine experts to identify and implement the areas of improvements and a global CBM strategy.
• Work with Procurement to ensure maximum leverage and support is obtained with regards to overall Condition Based Monitoring (CBM) vendor spend and execution support.
• Working with Business Development / Project execution to provide expert advice on new opportunities/ projects.
Required key skills
• Hands-on experience on rotary machine maintenance. Strong condition based monitoring experience including centrifugal compressors, large electric drive motors, gas turbines, refrigeration systems, steam systems, pumps, general mechanical systems such as adsorption systems/dryers and electrical installations.
• In depth knowledge of predictive and preventative maintenance techniques including the use of computerized maintenance management systems (EAM / Computer Maintenance Management System (CMMS) to manage these processes
Required qualifications/experience
• Minimum 15 years experience on maintenance of rotary machines including big and small centrifugal compressors, steam turbines, expansion turbines, pumps etc.
• Strong analytical, quantitative, leadership and influencing skills.
• Good communication skills.
Consultant
International Professional Services & Executive Search specialists in Engineering & Construction for Infrastructure and Oil & Gas industry
Camino Asia Pte Ltd
#07-06 High Street Plaza, High Street
Singapore 179 433
Ph: +65-6334 4700
We have our full fledged operations in USA, UAE, Singapore, India and associates in Philippines and China. Our MNC client is one of the largest global oil service companies that engineers, builds, maintains and modifies oil and gas production facilities, FPSO's Etc.
The incumbent will be the Onshore technical focal point for all Process Engineering governance, advice and support within the defined sphere of expertise and responsible to ensure BoD and FEED consistency in design proposals for the onshore packages. You will also provide guidance and work closely with the Operations Teams and Project Teams to maintain plant integrity and support achievement of production goals.
Key Responsibilities:
• Be able to develop a comprehensive understanding of the onshore wide pan-packages processes and the impact on the upstream assets.
• Detailed understanding of operational and engineering processes and has to work closely with colleagues and contractors across a number of different functional areas.
• Liaise with onshore packages, contractors, discipline leaders and upstream and downstream assets.
• Ensure readiness of onshore Process Engineering for Ichthys Production facilities start-up.
• Lead, co-ordinate, produce Process Engineering documentation in line with the demands of the varying onshore packages and operations.
• To undertake Process engineering design work in with true regard to Safety both in design detail and engineering design execution.
• To clearly understand the Codes and Standards applicable to the work carried out and raise deviations where necessary.
• Supervision of technical detail, budget and schedule of Process design in Project.
• Handle most innovative projects involving Concept/ FEED studies, EPC Detailed Design Projects as part of the overall project scope of works.
Requirements:
• Minimum Degree (or equivalent) in Chemical Engineering.
• Minimum 12 years of experience in FEED and Detail Engineering Design in Oil and Gas or Petrochemical industry.
• Lead experience or capability of leading a engineer team intermediate to senior professionals
• Excellent technical communication and coordination skills.
• Proven track record engineering design.
As a Rotary Equipment specialist, you will be a part of the Regional Reliability Engineering Team. Your key role would be to help ensure that all rotary machines are maintained using best practice maintenance strategies that result in required reliability performance of plant machinery and systems at optimal cost.
Principal responsibilities
• Primary focus on in-house operations and maintaining of existing machinery.
• Bring in-house expertise in the maintenance of rotary machines including expansion turbines throughout the Region. Train the local maintenance staff on the maintenance best practices to the level of OEM engineers.
• Optimize/ reduce maintenance spend on spares through assessing the condition of ex-service components, reconditioning removed components etc.
• Take care of emergent events and supervise rectification of failed equipment including engineering management of change (MOC) compliance, key decision making and determination of root cause etc.
• Working with regions, individual plants, RE, Remote Operating Centre (ROC) and Power Engineering (PE) teams, establish a quarterly Enterprise Asset Management (EAM) managed comprehensive key equipment health review process and report on developing issues, changes in status, and recommended actions and mitigation (include vibration, oil, catalyst, thermography, cooler approach, machine efficiency, cooling system)
• Maintain a data base of CBM best practice by plant category and equipment type, including both technical scope and business practice.
• Provide a monthly management report on CBM activities
Levels of engagement
• Work with the country / site maintenance teams to make sure that the rotary machines are maintained as per the best practices.
• Work with global team of rotary machine experts to identify and implement the areas of improvements and a global CBM strategy.
• Work with Procurement to ensure maximum leverage and support is obtained with regards to overall Condition Based Monitoring (CBM) vendor spend and execution support.
• Working with Business Development / Project execution to provide expert advice on new opportunities/ projects.
Required key skills
• Hands-on experience on rotary machine maintenance. Strong condition based monitoring experience including centrifugal compressors, large electric drive motors, gas turbines, refrigeration systems, steam systems, pumps, general mechanical systems such as adsorption systems/dryers and electrical installations.
• In depth knowledge of predictive and preventative maintenance techniques including the use of computerized maintenance management systems (EAM / Computer Maintenance Management System (CMMS) to manage these processes
Required qualifications/experience
• Minimum 15 years experience on maintenance of rotary machines including big and small centrifugal compressors, steam turbines, expansion turbines, pumps etc.
• Strong analytical, quantitative, leadership and influencing skills.
• Good communication skills.
For more details please contact:-
Siti Amizah AmranConsultant
International Professional Services & Executive Search specialists in Engineering & Construction for Infrastructure and Oil & Gas industry
Camino Asia Pte Ltd
#07-06 High Street Plaza, High Street
Singapore 179 433
Ph: +65-6334 4700
Email: siti.amizah@caminoasia.com
Lead Process Engineer
Camino Asia Pte.Ltd is a Global specialist Recruitment and Engineering services company. Our clients are among the top EPC companies in the world. Camino services them across Asia, Middle East and in the United States.
We have our full fledged operations in USA, UAE, Singapore, India and associates in Philippines and China. Our MNC client is one of the largest global oil service companies that engineers, builds, maintains and modifies oil and gas production facilities, FPSO's Etc.
For more details please contact siti.amizah@caminoasia.com
Lead Process Engineer
The incumbent will be the Onshore technical focal point for all Process Engineering governance, advice and support within the defined sphere of expertise and responsible to ensure BoD and FEED consistency in design proposals for the onshore packages. You will also provide guidance and work closely with the Operations Teams and Project Teams to maintain plant integrity and support achievement of production goals.
Key Responsibilities:
• Be able to develop a comprehensive understanding of the onshore wide pan-packages processes and the impact on the upstream assets.
• Detailed understanding of operational and engineering processes and has to work closely with colleagues and contractors across a number of different functional areas.
• Liaise with onshore packages, contractors, discipline leaders and upstream and downstream assets.
• Ensure readiness of onshore Process Engineering for Ichthys Production facilities start-up.
• Lead, co-ordinate, produce Process Engineering documentation in line with the demands of the varying onshore packages and operations.
• To undertake Process engineering design work in with true regard to Safety both in design detail and engineering design execution.
• To clearly understand the Codes and Standards applicable to the work carried out and raise deviations where necessary.
• Supervision of technical detail, budget and schedule of Process design in Project.
• Handle most innovative projects involving Concept/ FEED studies, EPC Detailed Design Projects as part of the overall project scope of works.
Requirements:
• Minimum Degree (or equivalent) in Chemical Engineering.
• Minimum 12 years of experience in FEED and Detail Engineering Design in Oil and Gas or Petrochemical industry.
• Lead experience or capability of leading a engineer team intermediate to senior professionals
• Excellent technical communication and coordination skills.
• Proven track record engineering design.
For more details please contact:-
Siti Amizah Amran
Consultant
International Professional Services & Executive Search specialists in Engineering & Construction for Infrastructure and Oil & Gas industry
Camino Asia Pte Ltd
#07-06 High Street Plaza, High Street
Singapore 179 433
Ph: +65-6334 4700
Consultant
International Professional Services & Executive Search specialists in Engineering & Construction for Infrastructure and Oil & Gas industry
Camino Asia Pte Ltd
#07-06 High Street Plaza, High Street
Singapore 179 433
Ph: +65-6334 4700
Email: siti.amizah@caminoasia.com
0 comments:
Post a Comment